Liaoning Yufei High Frequency Equipment Co., Ltd.

Introduction of PVC Welding Machine

The PVC welding machine is one of a wide variety of welding machines. It is an industrial special welding machine for processing plastics. There are many kinds of welding machines underneath, and mainly representing plastic welding machine is ultrasonic plastic welding machine.

1. Principle

The main working principle of PVC welding machine: When ultrasonic waves act on the thermoplastic plastic contact surface, it will produce tens of thousands of high frequency vibrations per second. This high frequency vibration reaching a certain amplitude transmits ultrasonic energy to the weld zone through the upper weldment. Since the weld zone, that is, the intersection of the two welds, has a large acoustic resistance, a local high temperature is generated. Moreover, because the plastic has poor thermal conductivity, it can not be dissipated in time and gather in the weld zone, so that the contact faces of the two plastics melt rapidly, and after a certain pressure, they are integrated into one. When the ultrasonic wave stops, the pressure continues for a few seconds, allowing it to solidify, thus forming a strong molecular chain for welding purposes, and the welding strength can be close to the strength of the raw material.

2. Ultrasonic

Ultrasonic plastic welding machine does not add any adhesive, filler or solvent, nor consumes a large amount of heat source when welding plastic products. It has the advantages of simple operation, fast welding speed, high welding strength and high production efficiency. Therefore, ultrasonic welding technology is becoming more and more widely used.
Related News
  • Introduction to HF machine

    Introduction to HF machine

    July 29, 2019HF machine, also known as switched reluctance motor(SR), was born 160 years ago. But for a long period of time, it has always been considered a low-performance motor, so it is only used in a few low-p...view
  • Precautions for the Use of Leather Embossing Machine

    Precautions for the Use of Leather Embossing Machine

    July 29, 2019Liaoning Yufei High Frequency Equipment Co., Ltd. has the most professional technicians and the best leather embossing equipment. Below are the top 10 things that Yufei will tell you when using:1. Thi...view
  • Technical Analysis of High Frequency Welding Machine

    Technical Analysis of High Frequency Welding Machine

    April 15, 2019High frequency welding machine is a kind of high frequency dielectric heating technology applied in the field of plastic packaging equipment.The main principle of the amount and high field of plastic ...view
  • Principle And Application Of High Frequency Blister Sealing Machine

    Principle And Application Of High Frequency Blister Sealing Machine

    May 24, 2019High frequency blister sealing machine is composed of frame, speed reduction drive mechanism, heating and cooling mechanism, sealing and printing mechanism, conveying device and electronic control sys...view
  • Common Maintenance Problems Of Rf Welder

    Common Maintenance Problems Of Rf Welder

    May 24, 2019After rf welder for sale by enterprises, there may be some breakdowns. Therefore, after rf welder for sale, enterprises need to provide after-sales service, including finding out the cause of failure,...view
  • The Benefits of Time-sharing Welding

    The Benefits of Time-sharing Welding

    October 23, 2017Recently, customers have inquired about the differences between the current heating process design and the single stage current heating in the three periods of the sun shading machine, the high freque...view
contact
©Liaoning Yufei High Frequency Equipment Co., Ltd. All RIGHTS RESERVED
sitemap Privacy Policy